How to Create Your Own Dog Mask – The Basics

  • by

In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the house, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it is really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure there is site a good seal between the two pieces so you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Make sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure that the ears are flat and make certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your dog protection, you’ll need to do some sanding to be certain it’s safe on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.

Leave a Reply

Your email address will not be published. Required fields are marked *